The Eyedro Wireless Electricity Monitor will help you realize just how much electricity is wasted every day and how much money you could save by reducing that waste.
You will soon realize that simple changes in your habits - like turning off lights, unplugging unused equipment, or dialing back the thermostat - will result in less consumption and more money in your pocket.
Eyedro can be used to monitor almost any circuit but the most common uses are to:
- Monitor an entire commercial building, department, or home
- Monitor tenant usage in an apartment building or mall
- Monitor specific equipment such as air conditioners, hot tubs, and machinery
- Show "before and after" results of energy improvement initiatives
Its non-invasive design measures electrical current, computes power consumed, stores the information remotely, and makes that information available via any web browser with internet access.
The wireless version has all the same features as the non-wireless version but does not require a network connection near the point where the sensors are installed.
The two modules will communicate with each other over their own wireless network so that the sensors can be installed where you need them, and the second module can be located near an available network connection.
The Eyedro wireless electricity monitor is expandable up to 32 "slave" modules, meaning up to 32 different sets of sensors may be monitored through a single gateway module.
A 1 year subscription to My-Eyedro Basic is included at no additional cost.
My-Eyedro Basic provides everything you need to monitor instantaneous and historical power usage, daily averages, cost to date, and it can even predict what your next bill total will be.
Full details can be found at My-Eyedro Monitoring Service.
- Non invasive installation - Simply clip the sensors around circuit to be monitored
- No complicated configuration - Just connect the module to the internet
- Thousands of measurements per second and 0.5 second resolution
- Low bandwidth usage (typically less than 1MB per day)
- Uptime - Receive an alert if communication to Eyedro system is lost
- Privacy - Electrical data sent over the internet has no personally identifiable information
- Access your system at my-eyedro.com from any web browser and smart phone
- No batteries to end up in landfill
- Monitors up to 200A service - 400A Coming Soon
Additional Functionality
- Wireless range up to 400ft (120m)
- Supports multiple wireless devices with a single ethernet gateway module
- Additional "slave" modules are easily added to increase number of available sensors
Model EY-EM-200-PRO includes the following:
- 1 - Eyedro Gateway module
- 1 - Eyedro Panel module (aka slave module)
- 2 - 200A current sensors
- 2 - low voltage power adapters
- 1 - 3ft (75cm) Ethernet Cable
Model EY-EM-200-PRO/3 is a 3-phase version of EY-EM-200-PRO. It includes the following:
- 1 - Eyedro Gateway module
- 1 - Eyedro Panel module (aka slave module)
- 3 - 200A current sensors
- 2 - low voltage power adapters
- 1 - 3ft (75cm) Ethernet Cable
- Sensors: Maximum 200A (400A Coming Soon)
- Power (Gateway module): 5VDC 0.300A (120VAC 50/60Hz wall mount adapter)
- Power (Panel module): 5VDC 0.300A (120VAC 50/60Hz wall mount adapter)
- Environmental: 32-100 °F (0-40°C) 80% relative humidity - indoor use only
- Module Dimensions: 3 x 3 x 1 inches (77 x 75 x 25 mm)
- Shipping Weight/Mass: approx 35oz (1kg)
- Wireless: 2.4GHz IEEE 802.15.4
Note: The wireless network is separate from your home and business network. It is automatically created and managed by the Eyedro modules, and cannot be accessed directly.
