Specifications

Hardware Specifications

	Ethernet + Wi-Fi	Mesh¹
Power Supply	Class 2 Power Supply Input: 120Vac, 60Hz (North America/Type A) Input: 240Vac, 50Hz (Europe/Type C) Output: 5V DC, 0-350mA
Pulse Input	Form A (KY) dry contact pulses 5V DC wetting value Rising or falling edge detection (default is rising) Minimum pulse width is 5ms Maximum frequency is 100Hz
Environmental Operating Conditions	Indoor Use Only 0°C to 50°C (32°F to 122°) 80% relative humidity Altitude up to 2000m (6562ft) Supply voltage fluctuations up to ±10% nominal Transient overvoltage up to Overvoltage Category II Temporary overvoltage Pollution Degree 2 Ingress protection level IP50
Storage Conditions	-20°C to 70°C (-4°F to 158°F) 80% relative humidity
Module Dimensions (W x H x D)	77 x 75 x 25 mm (3 x 3 x 1 in)
Parts Included	1x EMx.ENWI.2P 0-2x Pulse Cables 1x 10ft Ethernet Cable 1x 5V DC Power Adapter	1x EMx.NODE.2P 0-2x Pulse Cables 1x 5V DC Power Adapter 1x EMx.GATE.0N¹ 1x 3ft Ethernet Cable¹ 1x 5V DC Power Adapter¹
Weight [approximate]²	0.363 kg (0.8 lbs)	0.499 kg (1.1 lbs)

Wireless Link	IEEE 802.11 b/g/n 2.412 to 2.484 GHz	IEEE 802.15.4 2.405 to 2.480 GHz
Wireless Range [typical]³	Indoors: 50m (150ft) Line of sight: 100m (300ft)	Indoors: 150m (500ft) Line of sight: 300m (1000ft)

¹Gateway, (1) Power Supply and Ethernet cable are not included in Wireless Expansion products (ExB-M-2P)

² Approximate weight is based on standard two (2) sensor models including packaging and contents. Mesh assumes complete system (gateway and node).

³ Wireless range is dependent on the location and environment that device(s) are installed in. Typical values provided.