Specifications

Hardware Specifications

Power SupplyClass 2 Power Supply
Input: 120Vac, 60Hz (North America/Type A)
Input: 240Vac, 50Hz (Europe/Type C)
Output: 6Vac, 0-500mA
Environmental Operating ConditionsIndoor Use Only
0°C to 50°C (32°F to 122°)
80% relative humidity
Altitude up to 2000m (6562ft)
Supply voltage fluctuations up to ±10% nominal
Transient overvoltage up to Overvoltage Category II
Temporary overvoltage
Pollution Degree 2
Ingress protection level IP50
Storage Conditions-20°C to 70°C (-4°F to 158°F)
80% relative humidity
Module Dimensions (W x H x D)77 x 75 x 25 mm (3 x 3 x 1 in)
Parts Included1x EM*.ENWI.2E
2x 200A Current Sensors
1x 10ft Ethernet Cable
1x 6V AC Power Adapter
Weight [approximate]10.708 kg (1.6 lbs)
  
Wireless LinkIEEE 802.11 b/g/n 2.412 GHz to 2.484 GHz
Wireless Range [typical]2Indoors: 50m (150ft)
Line of sight: 100m (300ft)

1 Approximate weight is based on two (2) sensor models including packaging and contents.

2 Wireless range is dependent on the location and environment that device(s) are installed in. Typical values provided.

Sensor Specifications

SensorInputOutputAccuracyOpeningCable Length
200A
(ESCR-20-200A)
0 to 200Aac
600V 50/60Hz
0 to 0.333Vac±1% Typical119.00 mm (0.75 in)2000 mm (79 in)

1Accuracy noted is for sensor readings at 10% to 90% of rated current. This product also requires a continuous internet connection.

Leave a Reply

Your email address will not be published. Required fields are marked *