Software Configuration

The MyEyedro Cloud service is the interface for your Eyedro device(s) and used to perform all software configuration of your Eyedro products. Eyedro and MyEyedro are always working together to measure, analyze and store your usage and cost information. With MyEyedro, your data is automatically and securely stored in the cloud, so it’s ready when and where you need it most. MyEyedro presents your data in ways that are engaging, informative and easy to understand. See real-time usage and gain access to many helpful features, including:

• Responsive real-time graphs
• Hourly/Daily/Weekly/Monthly cost estimates
• Comparisons and estimates
• Configurable reports

MyEyedro is easy to use and accessible from a standard web browser.

1. Go online to: http://my.eyedro.com to create your online account (or login if you have an existing account).
2. From the devices configuration plugin, add your new device(s) using the serial number of the Eyedro Module(s) – found on the back of the device(s).

For more information on MyEyedro and complete instructions for adding devices, refer to the MyEyedro User Guide.

Configuration and Verification for Installers

In the event that you are installing the Eyedro Metering product(s) for another user (i.e. you are not the end user), use the Eyedro Install Tool to configure the device and verify it is operating correctly before leaving job site.

1. Go online to: https://my.eyedro.com/installer to create your online account (or login if you have an existing account).
2. Follow the prompts in the Device Setup Wizard plugin to:
   • Verify Internet connectivity
   • Update device firmware
   • Configure the device settings
   • Validate device measurements
   • Review any warnings or errors detected

For more information on the Eyedro Install Tool and complete instructions for device configuration and verification, refer to the Eyedro Install Tool User Guide