Specifications

Hardware Specifications

 Wireless (Mesh)Wi-Fi
Model NoEYEDRO.ILMEYEDRO.ILMEYEDRO.ILMEYEDRO.ILM
Part NoILM.NODE.1E.15AILM.NODE.1E.20AILM.WIFI.1E.15AILM.WIFI.1E.20A
Parts IncludedOne (1) Inline Wireless Mesh Electricity MonitorOne (1) Inline Wireless Mesh Electricity MonitorOne (1) Inline Wi-Fi Electricity MonitorOne (1) Inline Wi-Fi Electricity Monitor
One (1) Inlet Power CordOne (1) Inlet Power CordOne (1) Inlet Power CordOne (1) Inlet Power Cord
One (1) Outlet Power CordOne (1) Outlet Power CordOne (1) Outlet Power CordOne (1) Outlet Power Cord
  
Power Supply Voltage120VAC, 60Hz
Maximum Load (Outlet) Current15A20A15A20A
Measurement Accuracy±1% Typical1
  
Environmental Operating ConditionsIndoor Use Only
0°C to 50°C (32°F to 122°)
80% relative humidity
Altitude up to 2000m (6562ft)
Supply voltage fluctuations up to ±10% nominal
Transient overvoltage up to Overvoltage Category II
Temporary overvoltage
Pollution Degree 2
Ingress protection level IP50
  
Module Dimensions
(W x H x D)
160 x 70 x 45 mm
(6.25 x 2.75 x 1.75 in)
Weight [approximate]21.179 kg
(2.6 lbs)
  
Wireless LinkIEEE 802.15.4 2.405 to 2.480 GHzIEEE 802.11 b/g/n 2.412 to 2.484 GHz
Wireless Range3Indoors: 150m (500ft)
Line of sight: 300m (1000ft)
Indoors: 50m (150ft)
Line of sight: 100m (300ft)

1Accuracy noted is for sensor readings at 10% to 90% of rated current. This product also requires a continuous internet connection.

2 Approximate weight includes packaging and contents. Weight based on ILM.xxx.1E.20A model with inlet and outlet cords.

3 Wireless range is dependent on the location and environment that device(s) are installed in. Typical values provided.

Leave a Reply

Your email address will not be published. Required fields are marked *